GRIF
Our range of bale clamps are designed to handle both round and square bales, up to 3 round bales or 5 square bales depending on the model. These bale grippers have a one-piece frame and ringed joints. They are made for intensive use and are adaptable to all attachments on the market: front loader or telescopic.
- Simultaneous handling of round bales Ø 90 to 180 cm : 1
- Simultaneous handling of square bales: 1
- Number of teeth 2 x 2 - Ø 25 mm
- Nominal capacity 600 kg - Unladen weight 135 kg
- Height 810 mm – Opened clamp width 1560 mm
- Articulation fitted with bushes and lubricating nipples
- Not synchronized clamp kinematic
- Bolted-on hitch
- Hydraulic hoses included – Need 1 DE (hydraulic plug not included)
- Simultaneous handling of round bales Ø 90 to 180 cm : 2
- Simultaneous handling of square bales: 2
- Number of teeth 2 x 4 - Ø 25 mm
- Manually sliding height raiser + 65 cm
- Not synchronized clamp kinematic
- Nominal capacity 1600 kg - Unladen weight 230 kg
- Height 1210 mm – Opened clamp width 1560 mm
- Articulation fitted with bushes and lubricating nipples
- Hydraulic hoses included – Need 1 DE (hydraulic plug not included)
- Simultaneous handling of round bales Ø 90 to 180 cm : 2
- Simultaneous handling of square bales: 3
- Number of teeth 2 x 6 - Ø 25 mm
- Manually sliding height raiser + 65 cm
- Not synchronized clamp kinematic
- Nominal capacity 1600 kg - Unladen weight 320 kg
- Height 1730 mm – Opened clamp width 1560 mm
- Articulation fitted with bushes and lubricating nipples
- Hydraulic hoses included – Need 1 DE (hydraulic plug not included)
- Simultaneous handling of round bales Ø 90 to 180 cm : 3
- Simultaneous handling of square bales: 5
- Number of teeth 2 x 7 - Ø 25 mm
- Frame with 3 foldable lower teeth
- Synchronized clamp kinematic
- Nominal capacity 2000 kg - Unladen weight 750 kg
- Height 3000 mm – Opened clamp width 1560 mm
- Articulation fitted with bushes and lubricating nipples
- Hydraulic hoses included – Need 1 DE (hydraulic plug not included)
![](https://www.lucasg.com/wp-content/uploads/2022/02/Focus-synchronisation-des-griffes.jpg)
The clamps can optionally be synchronised when opening and closing. This option is highly recommended if you are used to handling small packages.
![](https://www.lucasg.com/wp-content/uploads/2022/02/Focus-Rehausse.jpg)
This extension option allows you to gain 65cm in height when loading, you gain stability when transporting and you can carry an extra square bundle.
![](https://www.lucasg.com/wp-content/uploads/2022/02/Focus-dents-repliables.jpg)
The claws can be equipped with optional folding or non-folding tines of one to three tines for better stability and safety when moving.