Spirmix Jet 2 augers 16-28
The Spirmix JET range of twin auger diet feeders consists of 3 models from 16 – 28m3. These straw bedders mixer wagons are equiped with a flywheel with a shredder that ensure straw bedding and distribution for the lateral chute. These feeders can feed a herd of 85 to 170 head in a single pass.
The range of twin auger straw blowers mixer wagons is available in 8 models based on 2 different designs, Spirmix 16 to 18 m3 and Spirmix 20 to 28 m3. The capacities can be increased by a simple set of extensions. Our objective is to offer compact machines with a consistent overall height that can be upgraded over time. These double-auger straw bedders diet feeders allow the distribution and straw bedding tasks to be carried out with one versatile machine. This means that, all year round, only one tractor and one machine are needed to care for the animals. These machines are equipped with a shredder at the turbine inlet to ensure that heavy rations are distributed without any problems of blockages. As standard, the machine is equipped with a lateral right chute that ensures straw is sprayed up to 18 m and distributed to the 1.20 m troughs.
- Lateral right chute for straw bedding and feeding
- One piece welded flywheel with two speed gearbox
- 2 Mixing auger equipped with 6 reversible tungsten carbide knives height 1100 mm
- In version 26 & 28 m3 8 knives with auger extension +30 cm
- 2 Manual cut-off plates
- Not programmable weighing box X 400
- Two-speed gearbox
- Electric control in the cab
- The standard machine uses 1 hydraulic function
La goulotte universelle possède une rotation sur roue dentée à 270° pour assurer un paillage à 15 m sur le côté droit et 13 m sur le côté gauche. Pour ajuster la profondeur de paillage il suffit de jouer avec la casquette.
- Hauteur de paillage max. 286 cm
- Hauteur de distribution max. 148 cm
La goulotte smart possède une cinématique de paillage unique grâce à une rotation perpendiculaire, elle permet de distribuer le long du couple machine tracteur quand le couloir est non débouchant. La performance de paillage est de 12 m le long de la machine et de 19 m en profondeur.
- Hauteur de paillage max. 210 cm
- Hauteur de distribution max. 160 cm
The Spirmix Jet are equiped with a Block from the CASTOR range of straw feeders recognized for its reliability and performance, for straw bedding over more than 18 meters. Mechanical shredder with teeth combined with a fixed barrier which feed the material with regularity into the Ø 1.6 m welded flywheel fittef with 6 blowing paddles.Chute cut-off plates, ensuring regular distribution, avoiding jamming problems. This system is enabling an accurate distribution direclty on the ground or into troughs.
The material moves better in a smooth rolled tank because it is not subjected to various constraints. As a result, the ration is mixed naturally and more effectively. The power required for a mix is reduced to a minimum. The smooth flared shape means that a homogeneous mixture can be obtained faster. The round design of the tank automatically extends the life of the tank. Aware of the intensive use of diet feeders, the tanks are made from HEL (High Elastic Limit) steel absorbing the stresses related to loading, mixing and to moving the laden machine.
Lucas G stepped augers have a unique shape that allows the ration to be cut and aerated through the steps that amplify the mixing of the ration for perfect homogeneity. As standard, the augers are equipped with 6 knives. It is possible to have 8 or 10 knives per auger and to adjust the angle of attack to increase the aggressiveness and thus cut the fibre more quickly. The screw blades have a tungsten carbide coating and are reversible to ensure a longer service life.
Each auger is driven by a planetary gearbox mounted halfway up the auger for a better stability and to reduce lateral resistance during mixing. These gearboxes are tested for intensive use and are independently protected by shear bolt to prevent damage.
All the vertical auger diet feeders are equipped with tank reinforcement which prevents deformation of the feeders. This reinforcement limits pressure on the planetary units and the weigh cells during displacement and loading phases to prevent damage.
The feeders Spirmix are standard equipped with a non-programable weighing system X400. Each machine is equipped with protected 3, 4 ou 6 weigh cells ensuring maximum stability and accuracy of the preparation of the ration. Depending on the model, functions available include weighing ingredients, managing feed recipes and adapting to number of animals and managing feed data. Tare weight system and skipping ingredient can be remote controlled. The X Management software will give you the possibility to manage your stock of raw material, calculate your feed costs per batch of animals.
Mixers are equipped with 2 oversized and manual cut-off plates of 85 cm as standard, they are reversed and located on rear right and front left of the tank side. These cut-off plates are adjustable in 5 positions to speed up the cutting process and to block the fibre at the bottom of the tank. As an option, it’s possible to equip the machine with hydraulic cut-off plates.